Differences

This shows you the differences between two versions of the page.

--- en:configuration_initiale_ecrans_sssp6 [2024/02/28 14:08]
pdelvallee
+++ en:configuration_initiale_ecrans_sssp6 [2024/03/14 15:01] (current)
pdelvallee
@@ Line 16: / Line 16: @@
 - Right arrow to go to the next menu
-{{ :fr:2_-_installation_type.jpg?800 |}}
+{{ :fr:2_-_type_d_installation.jpg?800 |}}
-__3 - Display orientation____ (in French)
+__3 - Display orientation __
 Depending on how your equipment is installed
 - Select portrait or landscape and confirm
 - Right arrow to go to the next menu
-{{ :fr:3_-_orientation_of_display.jpg?800 |}}
+{{ :fr:3_-_orientation_de_l_affichage.jpg?800 |}}
 __ 4 - Connecting to an internet network__}
+The equipment can be connected either to a wireless network (Wifi) or to a wired network (RJ45), depending on your type of connection.
+- If the screen is connected to the wired network, it will perform a network status check. If everything is OK, you will need to do the following with the right arrow.
-{{ :fr:4-1_-_connexion_sans_fil.jpg?800 |}}
 {{ :fr:4-2_-_connexion_cablee.jpg?800 |}}
+- If the screen is connected via Wi-Fi, you will need to select your Wi-Fi network, then enter your password before finishing. (The screen must be connected to a secure Wifi network).
+If everything is OK, click on the right arrow to continue.
+{{ :fr:4-1_-_connexion_sans_fil.jpg?800 |}}
+**- If you encounter any connection problems, please contact Manganelli support at 03.20.41.59.69**.
+__ 5 - Reading via __
+Once the network has been set up, you need to install the application. In Read via, select Launch URL. Then click Next (right arrow)
 {{ :fr:5_-_lire_via.jpg?800 |}}
+Enter the URL of the zebrix server:
+For the USA http://screen.zebrix.us
+for Europe http://screen.zebrix.net
+Then click on "Done".
 {{ :fr:6_-_renseigner_l_url.jpg?800 |}}
+__ 6 - Configuring the RM server__
+In the server address, enter: rm.manganelli.com:7001 then click "Done" and right arrow to go to the next menu.
 {{ :fr:7_-_rm_serveur.jpg?800 |}}
-rm.manganelli.com:7001
+__ 7 - Server peripherals __
+You don't have to do anything, just right arrow to skip the menu.
 {{ :fr:8_-_peripherique_sur_serveur.jpg?800 |}}
+__ 8 - Setting the date and time __
+Use the arrows to set the screen to the correct date and time,
+Caution: if the screen is not set correctly for the time and day, this could cause problems with broadcasting on the screens.
 {{ :fr:9_-_reglage_horloge.jpg?800 |}}
+Congratulations, the screen configuration is now complete!
 {{ :fr:10_-_ecran_config.jpg?800 |}}
+All that's left is to launch the application by pressing "Home".
 {{ :fr:11_-_home_lancement_url.jpg?800 |}}
+Select "Launch URL"
 {{ :fr:12_-_installation_of_the_application.jpg?800 |}}
 {{ :fr:13_-_installation_termine.jpg?800 |}}
+Once the application is complete, the content will be broadcast.
+(If this is an installation configuration, the screen may need to be activated. Please contact support if this is the case.)
 {{ :fr:14_-_finitopipo.jpg?800 |}}