Differences

This shows you the differences between two versions of the page.

--- en:configuration_initiale_ecrans_tizen7 [2024/03/14 16:03]
pdelvallee
+++ en:configuration_initiale_ecrans_tizen7 [2025/10/09 18:13] (current)
nraulet
@@ Line 1: / Line 1: @@
-===== Initial configuration Tizen 7 screen======
+===== Initial Setup – Tizen 7 Screen ======
-The following operations must be carried out using the Samsung remote control
+Follow the steps below using the Samsung remote control.
-__1 - Language selection __
+__1 - Language Selection__
-- Scroll down using the arrows and select "Français" using the OK button (located between the arrows).
+Use the arrow keys to scroll and select "French" with the OK button (between the arrows).
-- Right arrow to move on to the next menu
-{{ :fr:1_choix_de_la_langue_tizen_7.jpg?nolink&600 |}}
+Press the right arrow to proceed to the next menu.
-__ 2 - Connecting to an internet network__
+{{ :fr:inittizen72.png?1000 |}}
-The equipment can be connected either to a "wireless" network (Wifi) or to a wired network (RJ45) depending on your type of connection, select the option with the Ok button.
+__2 - Connect to a Network__
-{{ :fr:2_type_de_reseau_tizen_7.jpg?nolink&600 |}}
+You can connect the device via a wireless network (Wi-Fi) or a wired connection (RJ45) depending on your setup. Select the option with the OK button.
-- If the screen is wired, it will perform a network status, if everything is ok, you will have to do next with the right arrow.
+{{ :fr:connexioncablee.png?1000 |}}
-{{ :fr:2_connexion_rj45.jpg?nolink&600 |}}
-- If the screen is connected via Wifi, select your Wifi network, then enter your password before finishing. (The screen must be connected to a secure Wifi network).
+Wired: The screen will check the network status. If everything is OK, press the right arrow to continue.
-It will perform a network status, if everything is ok, you will have to do next with the right arrow.
+{{ :fr:connexioncableelok.png?1000 |}}
-{{ :fr:2_connexion_wifi.jpg?nolink&600 |}}
+Wi-Fi: Select your network and enter the password, then press Finish. (A secure Wi-Fi connection is required.)
+The screen will verify the connection; if everything is OK, press the right arrow to continue.
-**- If you encounter any connection problems, please contact Manganelli support at 03.20.41.59.69**.
+{{ :fr:inittizen71.png?1000 |}}
+{{ :fr:inittizen73.png?1000 |}}
+{{ :fr:connectionsansfilok.png?1000 |}}
- - Smart Signage Privacy Notice
+- For connection issues, contact Manganelli support at 03.20.41.59.69
-- Click on Ok and Right Arrow to go to the next menu
+__3 - Smart Signage Privacy Notice__
-{{ :fr:3_avis_de_confidentialite_smart_signage.jpg?nolink&600 |}}
+Press OK, then the right arrow to continue.
-__ 4 - Type of installation __
+{{ :fr:inittizen76.png?1000 |}}
-Select "Manual Configuration" with the OK button.
+__4 - Installation Type__
-{{ :fr:4_type_d_installation.jpg?nolink&600 |}}
+Select "Manual Setup" with the OK button.
-- Display orientation __
+{{ :fr:inittizen77.png?1000 |}}
-Depending on the installation of your equipment
+__5 - Display Orientation__
-- Select portrait or landscape, confirm
-- Right arrow to go to the next menu
-{{ :fr:5_orientatin_de_l'affichage.jpg?nolink&600 |}}
+Choose portrait or landscape according to your setup and confirm.
-__ 6 - Selecting the player
+Press the right arrow to proceed.
-- Select "Custom application" with the Ok button
+{{ :fr:orientationaffichage.png?1000 |}}
-{{ :fr:6_player_selection.jpg?nolink&600 |}}
+__6 - Player Selection__
-Then enter the URL of the zebrix server:
+Select "Custom Application" with the OK button.
-For the USA http://screen.zebrix.us
+{{ :fr:inittizen74.png?1000 |}}
-for Europe http://screen.zebrix.net
+Enter the Zebrix server URL:
-Then click on "Done".
+USA: http://screen.zebrix.us
-{{ :fr:6_-_renseigner_url.jpg?800 |}}
+Europe: http://screen.zebrix.net
-__7 - Configuring the RM server __
+Click "Finish."
-In the server address, enter: rm.manganelli.com:7001 then click on "Done" and the right arrow to move on to the next menu.
+{{ :fr:intitizengestionappli.png?1000 |}}
-{{ :fr:7_config_rm_serveur.jpg?nolink&600 |}}
+__7 - Configure the RM Server__
-__ 8 - Server peripherals __
+Enter the server address: rm.manganelli.com:7001
-You don't have to do anything, just right arrow to skip the menu.
+Press "Finish" and then the right arrow to continue.
-{{ :fr:8_peripherique_sur_serveur.jpg?nolink&600 |}}
+{{ :fr:connectionrmserveur.png?1000 |}}
-__ 9 - Switching off  __
+__8 - Server Device__
-Select "Off" then right arrow to go to the next menu
+No action needed, just press the right arrow.
-{{ :fr:9_mise_tension.jpg?nolink&600 |}}
+{{ :fr:peripheriquesurserveur.png?1000 |}}
-__ 10 - Setting the date and time __
+__9 - Power Off Settings__
-Use the arrows to update the screen and set the time,
+Select "Off" and press the right arrow to continue.
-Caution: if the screen is not set correctly for the time and day, this could lead to problems with broadcasting on the screens.
-Right arrow to go to the next menu
-{{ :fr:10_date_et_heure.jpg?nolink&600 |}}
+{{ :fr:hors_ten._auto.png?1000 |}}
-__ 11 - Pim code__
+__10 - Date and Time Settings__
+Use the arrows to set the correct date and time.
+⚠️ Incorrect settings may cause display issues.
-You don't have to do anything, just right arrow to skip the menu.
+Press the right arrow to continue.
-{{ :fr:11_code_pim.jpg?nolink&600 |}}
+{{ :fr:definitionheure.png?1000 |}}
-Congratulations, the screen configuration is complete!
+__11 - Pin Code__
-{{ :fr:12_-c_est_config.jpg?nolink&600 |}}
+No action needed, just press the right arrow.
-Now all you have to do is launch the application by pressing "Home".
+{{ :fr:defpin.png?1000 |}}
-Go to the "Functions" tab and select "Custom APP
-{{ :fr:13_-_lancer_l_appplication.jpg?nolink&600 |}}
+__12 - Auto Source Change__
-{{ :fr:14_-_chargement_installation.jpg?nolink&600 |}}
+Press MENU, navigate to System > Auto Source Change.
-Once the application is complete, the content will be broadcast.
+{{ :fr:system.png?1000 |}}
-(If this is a configuration during an installation, the screen may need to be activated. Please contact support in this case.)
+Select Auto Source Change > New Input.
-{{ :fr:15_diffusion.jpg?nolink&600 |}}
+Use the arrows to select Default Input > Custom Application.
+{{ :fr:changementsourceauto.png?1000 |}}
+__13 - Set Up Wake-Up Timer__
+Press HOME, then navigate to Settings > Prog. On/Off using the right arrow.
+{{ :fr:inittizenprogtime.png?1000 |}}
+Select Prog. On.
+{{ :fr:progact_desact.png?1000 |}}
+For Prog. On 1 and Prog. On 2, change from "Do not use" to select the days and set wake-up times according to the business hours.
+{{ :fr:progr.activ.png?1000 |}}
+{{ :fr:progr.activ._1.png?1000 |}}
+__14 - Power Settings__
+Press MENU, navigate to System > Power Settings.
+{{ :fr:reglagealimentation.png?1000 |}}
+Enable the settings as shown in the image.
+{{ :fr:reglagealimentation_configurationdistance.png?1000 |}}
+🎉 Configuration is complete!
+{{ :fr:readystart.png?1000 |}}
+Launch the app by pressing "Home."
+Go to the "Functions" tab and select "Custom APP."
+{{ :fr:launchcustumapp.png?1000 |}}
+{{ :fr:installationok.png?1000 |}}
+Once the app is launched, the content will be displayed.
+If this setup is during an installation, the screen may request activation. Contact support if this occurs.
+{{ :fr:videoplaying.png?1000 |}}