Differences

This shows you the differences between two versions of the page.

--- en:epaper_samsung_configuration [2025/08/22 10:42]
admin ↷ Page name changed from en:comment_installer_zebrix_sur_un_ecran_epaper_samsung to en:epaper_samsung_configuration
+++ en:epaper_samsung_configuration [2025/08/22 11:02] (current)
admin
@@ Line 1: / Line 1: @@
 ====== How to install zebrix on a SAMSUNG ePaper screen? ======
 Compatible models:
-- Samsung EMDX 380V
+  * Samsung EM32DX
-===== Step 1: Updating the screen firmware =====
-.1 Prepare a USB drive with the firmware update
+===== Step 1: Screen firmware update =====
+.1 Download the latest firmware approved by zebrix
 <WRAP center round download 60%>
-Firmware download: https://downloads.zebrix.net/S-RSEDWWC_1030.11_USB_Common.zip
+Firmware download: https://downloads.zebrix.net/S-RSEDWWC_1040.32_USB_Common.zip
-</WRAP>
-.2 Plug the drive into the USB port of the screen - Attention requires a type C USB drive
-.3 When the drive is detected, the screen updates automatically; the process takes a few minutes
-.4 Once the screen is updated, it restarts and displays an initial configuration page; if this is not the case, you will need to press the ON button
-===== Step 2: Installing the setup app on a smartphone =====
-==== 2.1 Downloading the app: ====
-- On iPhone: scan the QR code displayed on the screen to download the app from the Apple AppStore
-- On Android: do not download the app from the PlayStore, you need to download a specific version of the app here:
-<WRAP center round download 60%>
-Download the SAMSUNG configuration app for Android: https://downloads.zebrix.net/downloads/ePaper_1.1.1.0508_rc81-dev-debug.apk
 </WRAP>
+.2 Place the content of the zip file (the directory named **S-RSEDWWC**) at the root of a **USB-C** key.
+.3 Plug the USB-C key into the screen’s USB-C port. There are two USB-C ports on the screen. If the screen is on battery, make sure to use the USB-C data port and not the power-only port.
+.4 When the key is detected, the screen automatically updates; the process takes a few minutes.
+.5 Once the screen is updated, it restarts and displays an initial setup page showing 3 QR Codes. If this is not the case, press the POWER button on the screen.
+===== Step 2: Installing the setup application on a smartphone =====
+==== 2.1 Downloading the application: ====
+Scan the QR code displayed on the screen to download the application from the appropriate store depending on your phone model (Android or iOS).
 {{ :fr:samsung_epaper_qrcode.jpg?nolink&400 |}}
-==== 2.2 A request to use Bluetooth will be launched on the smartphone to pair with the screen ====
-Validate the Bluetooth pairing (Bluetooth must be enabled on your smartphone)
+==== 2.2 A Bluetooth usage request is triggered on the smartphone to pair with the screen ====
-==== 2.3 Connection to the available WiFi network: ====
-The screen must now be connected to the same WiFi network that the smartphone is also connected to
+Confirm Bluetooth pairing (Bluetooth must be enabled on your smartphone).
-You must therefore select the WiFi network and then enter the WiFi security key so that it is transmitted to the screen
-{{ :fr:samsung_epaper_wifi.png?nolink&400 |}}
+==== 2.3 Connection to the available wifi network: ====
-===== Step 3: Finalizing the screen configuration via the app =====
-==== 3.1 You must validate the terms of use of the screen by the manufacturer to access the next step ====
+The screen must now be connected to the same wifi network as the smartphone.
-Press next to continue the installation
+Select the wifi network and then enter the wifi security key so it can be transmitted to the screen.
-==== 3.2 You must then select the type of configuration ====
-Press Manual setup
+===== Step 3: Finalizing screen configuration via the application =====
+==== 3.1 You must accept the manufacturer’s terms of use to proceed to the next step ====
+Press Next to continue the installation.
+==== 3.2 Then select the "Manual Setup" configuration ====
+Press **Manual setup**
 {{ :fr:epaper_samsung_setup.png?nolink&200 |}}
 ==== 3.3 Select the screen orientation ====
-Depending on its positioning during installation
+Depending on its installation position
 {{ :fr:samsung_epaper_orientation.png?nolink&200 |}}
 ==== 3.4 Other settings ====
-- Device sleep after = Always ON
-- Network Standby; On (default)
+  * Device sleep after = **Always ON**
-- Automatic date and time: On
+  * Network Standby: **On** (default)
-- Set refresh time: 01:00 (default)
+  * Automatic date and time: **On**
+  * Set refresh time: **01:00** (default)
+<WRAP center round important 60%>
+The parameter **Device sleep after = Always ON** is absolutely mandatory for now.
+SAMSUNG screens do not yet handle the automatic relaunch of an application such as zebrix when waking up from sleep mode.
+This point is under investigation and correction with SAMSUNG.
+</WRAP>
 ==== 3.5 Server address ====
-After the previous setting, the app offers to select the content reading mode
-Select "Custom" and then enter the following URL: https://epaper.zebrix.net (https://epaper.zebrix.net)
+After the previous setting, the application asks you to select the content playback mode.
-==== 3.6 Enter a PIN code and name the screen as desired ====
+Select "Custom" then enter the following url: **https://epaper.zebrix.net**
-Example PIN code: 123456
+==== 3.6 Define a PIN code then name the screen as desired ====
 {{ :fr:samsung_epaper_nom_ecran.png?nolink&400 |}}
-Congratulations, your screen is configured and displays a Zebrix activation page, you can now request its activation from our support
+===== 4. Congratulations! Your screen is configured on zebrix! =====
+The screen displays a Zebrix activation page, you can now proceed with its activation.