Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
en:how_to_install_zebrix_on_a_giada_player [2020/07/01 11:56] hchedjou created |
en:how_to_install_zebrix_on_a_giada_player [2021/08/25 10:29] (current) |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | In order to use a Giada player with Zebrix, you need to equip it with : | + | ================= Zebrix on Giada Players =================== |
| - | - 4Gb of Ram | + | |
| - | - 120 Gb SSD Drive | + | |
| - | Then, you have to configure the BIOS of the units to allow Zebrix installation and proper run on the hardware which are : | + | In order to use a Giada player with Zebrix, you need to equip it with :\\ |
| + | - 4Gb of Ram \\ | ||
| + | - 120 Gb SSD Drive \\ | ||
| - | Press the “del” key on device startup to enter the BIOS menu : | + | Then, you have to configure the BIOS of the units to allow Zebrix installation and proper run on the hardware which are : \\ |
| - | 1 - Go to "Advanced"; then "wake configuration" then look for "JAHC Switch" -> enable | + | Press the “del” key on device startup to enter the BIOS menu : \\ |
| - | 2 - Go to "Boot" -> Fastboot -> Disabled | + | |
| - | 3 - Still in the "Boot" menu -> Boot Option#1 = UEFI USB Device | + | |
| - | 4 - Still in the "Boot" menu -> Boot Option#2 = UEFI Nvme | + | |
| - | 5 - Still in the "Boot" menu -> Boot Option#3 = UEFI Hard Disk | + | |
| - | 6 - In the "Security" menu -> attempt secure boot -> Disable | + | |
| - | Save and quit the BIOS menu (the device will restart) | + | 1 - Go to "Advanced"; then "wake configuration" then look for "JAHC Switch" -> enable \\ |
| + | 2 - Go to "Boot" -> Fastboot -> Disabled \\ | ||
| + | 3 - Still in the "Boot" menu -> Boot Option#1 = UEFI USB Device \\ | ||
| + | 4 - Still in the "Boot" menu -> Boot Option#2 = UEFI Nvme \\ | ||
| + | 5 - Still in the "Boot" menu -> Boot Option#3 = UEFI Hard Disk\\ | ||
| + | 6 - In the "Security" menu -> attempt secure boot -> Disable \\ | ||
| - | When all of this is done, you can install the Zebrix image with a usb stick; here is the link to download it : | + | Save and quit the BIOS menu (the device will restart) \\ |
| - | http://www.zebrix.net/downloads/18.11-01-ZEBRIX-120GB-K419-USB-AUTOINSTALL-US.zip | + | When all of this is done, you can install the Zebrix image with a usb stick; here is the link to download it : \\ |
| + | |||
| + | https://downloads.zebrix.net/18.11-01-ZEBRIX-120GB-K419-USB-AUTOINSTALL-US.zip | ||
| + | |||
| + | ============================= | ||
