Differences

This shows you the differences between two versions of the page.

--- en:how_to_setup_a_video_wall [2021/08/25 10:29]
127.0.0.1 external edit
+++ en:how_to_setup_a_video_wall [2025/10/13 09:17] (current)
nraulet
@@ Line 1: / Line 1: @@
-====== How to setup a video wall with Samsung screens ? ======
+====== How to set up a video wall with Samsung screens ======
-====== Step 1 ======
+===== Step 1 =====
-Press the "HOME"button on your remote control
+Press the “HOME” button on your remote control.
 {{:support:menuhom.jpg?400|}}
-====== Step 2 ======
+===== Step 2 =====
-Use the arrows on the menu to reach "Video Wall".
+Use the navigation arrows to go to the “Video Wall” menu.
 {{:support:hommur.jpg?400|}}
-====== Step 3 ======
+===== Step 3 =====
-Set the "Video Wall" option on "ON"
+Enable the “Video Wall” option by setting it to ON.
 {{:support:murimg.jpg?400|}}
-====== Step 4 ======
+===== Step 4 =====
-Here you will have to set :
+Configure the following settings:
-  * The actual size of the video wall, defined by the number of screens you will have horizontally and vertically
+Video wall size: number of screens arranged horizontally and vertically
-  * The position of each screen in the video wall
-  * Choose the "Full" mode : For the full size, non-cropped picture (which is sometimes not suitable in video walls because of the screens' border.
-  * Choose the "Natural" mode : to correct the screens' border issues, you will get a more natural picture overall the video wall (picture is automatically cropped to get that result)  .
-====== Step 5 ======
+Screen position: position of each screen within the video wall
-Set each screen position in the menu accordingly to their actual physical position on the video wall, and connect the screens following this logic :
+“Full” mode: displays the entire, uncropped picture (may not be suitable due to screen bezels)
-**(Be aware that the connection ports of a screen always differs between different screen models, which is why you should always build a video wall with the same screen models)**
+“Natural” mode: adjusts for screen bezels to provide a more uniform overall image (the picture is automatically cropped to achieve this result)
-In our example, we will use Samsung Tizen PM series :
+===== Step 5 =====
-Choose the first screen, this screen will receive the source's signal (from a Zebrix player for instance).
-The first screen receives the signal of the Zebrix player by and HDMI cable - connect the Zebrix player to the first screen with an HDMI cable
-The second screen in the video wall receives the signal from the first by a DisplayPort cable - connect the a DisplayPort cable from the DP_OUT port of the first screen to the DP_IN port of the second screen
-Keep connecting all the remaining screens of the video wall following that principle until they are all connected.
-When all the screen are connected, power the video wall on and check the configuration.
+Assign each screen its position in the menu according to its actual physical position on the video wall, then connect the screens as follows:
+Warning: connection ports may vary depending on the screen model.
+It is recommended to use identical screen models to build a video wall.
+Example: Samsung Tizen PM series
+The first screen receives the source signal (for example, from a Zebrix player).
+→ Connect the Zebrix player to the first screen using an HDMI cable.
+The second screen receives the signal from the first via a DisplayPort cable.
+→ Connect a DisplayPort cable from the DP_OUT port of the first screen to the DP_IN port of the second screen.
+Repeat this process for all remaining screens until the entire video wall is connected.
+Once all screens are connected, power on the video wall and verify the configuration.