Differences

This shows you the differences between two versions of the page.

Link to this comparison view

— en:mises_a_jour_du_firware_nuc_par_cles_usb [2025/10/14 14:45] (current)
nraulet created
Line 1: Line 1:
 +====== NUC Firmware Updates via USB Drive ======
  
 +<WRAP center round important 60%>
 +
 +Before starting, we recommend that you note down all the network information of your player, as this will be completely erased.
 +</​WRAP>​
 +
 +==== Step 1: Update the NUC ====
 +
 +Plug your USB drive into the player and turn it on.
 +
 +Normally, the player should boot automatically from the USB drive, but if it doesn’t:
 +
 +Case #1: You will need to access the BIOS of your player
 +
 +You can access it by pressing F10 during the player startup.
 +Once in the BIOS, you can select a boot order so that your player boots from the USB drive:
 +
 +<WRAP center round info 60%>
 +UEFI : USB : KingstonDataTraveler 3.0 : PART 0 : OS Boot loader
 +</​WRAP>​
 +
 +{{:​fr:​pasted:​20220428-152243.png}}
 +
 +Case #2: A hardware issue prevents the player from booting correctly
 +
 +In this case, please contact our support team at +33 (0)3 20 41 59 69 or by email at support@zebrix.net
 +.
 +
 +==== Step 2: Choose the Firmware ====
 +
 +Once the selection is confirmed, the firmware installation will start and all steps will execute automatically.
 +
 +{{:​fr:​pasted:​20220428-152505.png}}
 +
 +When the installation is complete, the message below will appear. Remove the USB drive and then restart the player.
 +
 +{{:​fr:​pasted:​20220429-131228.png}}