Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
en:prerequis_sssp [2018/09/20 14:36] admin ↷ Liens modifiés en raison d'un déplacement. |
en:prerequis_sssp [2023/10/18 21:54] (current) admin [Destination IP and port to allow on your firewall] |
||
|---|---|---|---|
| Line 11: | Line 11: | ||
| ===== Physical connectivity ===== | ===== Physical connectivity ===== | ||
| - | If you use a wired connection You'll need one available port on your switch per screen. If the spanning tree protocol is enable please configure it in "portfast mode" or disable it. (The spanning tree protocol can prevent the screen to connect zebrix because it will try to reach the server before the spanning tree has allowed the port) | + | If you use a wired connection You'll need one available port on your switch per screen. |
| If you want to use a wireless network, please ensure that the signal strength is good enough. More generally using a wired connection is always more reliable. | If you want to use a wireless network, please ensure that the signal strength is good enough. More generally using a wired connection is always more reliable. | ||
| Line 23: | Line 23: | ||
| ^Source IP^Source Port^ Destination IP ^Destination Port ^ | ^Source IP^Source Port^ Destination IP ^Destination Port ^ | ||
| - | |**any** |**any** |**46.105.174.70 (screenv2.zebrix.net)**|**TCP 80 or 443 or 6001 or 6002**| | + | |**any** |**any** |**46.105.174.70 (screen.zebrix.net)**|**TCP 80 or 443 or 6001 or 6002**| |
| - | If your are in North America: | + | If your are in South or North America: |
| ^Source IP^Source Port^ Destination IP ^Destination Port ^ | ^Source IP^Source Port^ Destination IP ^Destination Port ^ | ||
