Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
en:sssp_screen_-_initial_setup [2020/06/30 17:48]
vnortier 		en:sssp_screen_-_initial_setup [2025/10/15 15:16] (current)
nraulet
Line 1: Line 1:
-====== ​** SSSP SCREEN INITIAL SETUP ** ======+====== SSSP SCREEN INITIAL SETUP ======
  
 This guide will allow you to perform the initial setup of an SSSP Screen, you can perform those steps after a factory reset. This guide will allow you to perform the initial setup of an SSSP Screen, you can perform those steps after a factory reset.
  
 +==== Step 1 : Choose your language ==== 
 +{{:​en:​langue.jpg?​1000}}
  
 +==== Step 2 : Choose your screen orientation ====
  
-Step 1 : Choose ​your language ​ +{{:​en:​powersettings.jpg?​1000}} 
-{{:en:langue.jpg?400 }}+==== Step 3 : Disable the Auto Power Off ==== 
 +{{:​en:​network_test.jpg?​1000}} 
 +==== Step 4 : Choose ​the network adapter ==== 
 +{{:en:play_mode.jpg?1000|}}
  
-----  +If a RJ45 Network wire is connected, ​the screen will perform a network diagnostic. **The Screen need to be connected to Internet to reach Zebrix.**
-Step 2 : Choose your screen orientation +
----- +
-Step 3 : Disable ​the Auto Power Off  +
-{{:​en:​powersettings.jpg?400 }}+
  
----- +==== Step 6 (step 5 is skipped if you are connected to the internet) : define this option to 'URL Launcher' ​====
-Step 4 : Choose the network adapter, if a RJ45 Network wire is connected, the screen will perform a network diagnostic. **The Screen need to be connected to Internet to reach Zebrix.** +
-{{:​en:​network_test.jpg?​400 |}} +
- +
----- +
-Step 6 (step 5 is skipped if you are connected to the internet) : define this option to 'URL Launcher' ​ +
-{{:​en:​play_mode.jpg?​400 |}}+
  
 you will need to use this URL : http://​screenv2.zebrix.net , then press "​Done"​ you will need to use this URL : http://​screenv2.zebrix.net , then press "​Done"​
  
----- +{{:​en:​complete.jpg?​1000}} {{:​en:​home.jpg?​1000}} 
-Step 7 : Your screen is correctly configured. Pressing "​OK"​ will send you to the "​Home"​ Menu, from wich you can start Zebrix. Press OK +==== Step 7 : Your screen is correctly configured ====
-{{:​en:​complete.jpg?​400 |}} {{:​en:​home.jpg?​400 |}}+
  
-----+Pressing "​OK"​ will send you to the "​Home"​ Menu, from wich you can start Zebrix. Press OK
 Your screen should now appear on Zebrix, you can now manage it via the CMS. Your screen should now appear on Zebrix, you can now manage it via the CMS.