Differences

This shows you the differences between two versions of the page.

--- en:sssp_screen_-_initial_setup [2025/09/17 15:49]
nraulet
+++ en:sssp_screen_-_initial_setup [2025/10/15 15:16] (current)
nraulet
@@ Line 3: / Line 3: @@
 This guide will allow you to perform the initial setup of an SSSP Screen, you can perform those steps after a factory reset.
+==== Step 1 : Choose your language ====
+{{:en:langue.jpg?1000}}
-{{:en:langue.jpg?400}}
+==== Step 2 : Choose your screen orientation ====
-Step 1 : Choose your language
+{{:en:powersettings.jpg?1000}}
+==== Step 3 : Disable the Auto Power Off ====
+{{:en:network_test.jpg?1000}}
+==== Step 4 : Choose the network adapter ====
+{{:en:play_mode.jpg?1000|}}
+If a RJ45 Network wire is connected, the screen will perform a network diagnostic. **The Screen need to be connected to Internet to reach Zebrix.**
-Step 2 : Choose your screen orientation
+==== Step 6 (step 5 is skipped if you are connected to the internet) : define this option to 'URL Launcher' ====
-----
-{{:en:powersettings.jpg?400}}
-Step 3 : Disable the Auto Power Off
-----
-{{:en:network_test.jpg?400}}
-Step 4 : Choose the network adapter, if a RJ45 Network wire is connected, the screen will perform a network diagnostic. **The Screen need to be connected to Internet to reach Zebrix.**
-----
-{{:en:play_mode.jpg?400|}}
-Step 6 (step 5 is skipped if you are connected to the internet) : define this option to 'URL Launcher'
-----
 you will need to use this URL : http://screenv2.zebrix.net , then press "Done"
-----
+{{:en:complete.jpg?1000}} {{:en:home.jpg?1000}}
-{{:en:complete.jpg?400}} {{:en:home.jpg?400}}
+==== Step 7 : Your screen is correctly configured ====
-Step 7 : Your screen is correctly configured. Pressing "OK" will send you to the "Home" Menu, from wich you can start Zebrix. Press OK
-----
+Pressing "OK" will send you to the "Home" Menu, from wich you can start Zebrix. Press OK
 Your screen should now appear on Zebrix, you can now manage it via the CMS.