Differences

This shows you the differences between two versions of the page.

--- en:zebrix_on_innes_players [2023/09/07 10:09]
ploiseau
+++ en:zebrix_on_innes_players [2025/07/03 15:17] (current)
admin [Player version update :]
@@ Line 1: / Line 1: @@
-**Zebrix on Innes Players**
+====== Zebrix on Innes Players DMB300 & DMB400 ======
-How do I install zebrix on an innes player?
-  * Connect the player to the network using an ethernet cable
+===== How do I install zebrix on an Innes player? =====
-  * Connect the player to a screen
-  * The screen should display a test pattern containing network information
-Installation via the WebUI:
+* Connect the player to the network using an ethernet cable
+* Connect the player to a screen
+* The screen should display a test card containing network information
+===== Installation via the WebUI: =====
   * Connect using an Internet browser with the address ipV4 or ipV6 to access the WebUI (e.g. http://10.10.10.10/.admin)
   * Enter the login and password: (admin / admin)
-  * Go to "Configuration" then "App" - Select "Third Party" then "Pull Webdav"
+{{ :fr:innes1.png |}}
+  * Go to "Configuration" then "App"
+  * Select "Third Party" then "Pull Webdav"
   * Enter the URL : http://screen.zebrix.net" and enter 23:59:59 for the "heartbeat"
-  * Click on "Validate", then restart the device using the button at top right
+  * Click on "Validate",
+  * Do not restart the player immediately
-Installation via USB key:
+{{ :fr:innes2.png |}}
+  * Go to the "Maintenance" tab, then to "Test card".
+  * Deactivate test card
+  * Then restart the device using the button at top right
+===== Installation via USB key: =====
   * Download the configuration script:
   * Format the USB key in FAT32
   * Inject the script into the USB key, then into the player
-Warning: The screen must display the test pattern before you can inject the configuration script.
+<WRAP center round important 60%> The screen must display the test card before you can inject the configuration script.</WRAP>
  The player restarts, and the Zebrix solution is launched.
-Limitations:
-  * PIP only works on the DMB400 model
+===== Player version update : =====
+  * Download zip file
+<WRAP center round download 60%>
+**Download INNES DMB 400 Firmware 5.11.14** https://downloads.zebrix.net/gekkota_os-dmb400-setup-5.11.14.zip
+</WRAP>
+or
+<WRAP center round download 60%>
+**Download INNES DMB 300 Firmware 5.12.11** https://downloads.zebrix.net/gekkota_os-dmb300-setup-5.12.11.zip
+</WRAP>
+  * Unzip it, you'll get a frm file.
+  * Enter the WebUi address on browser (corresponding to the player's ip)
+{{ :fr:innes3.png |}}
+  * Go to "Maintenance" then "Middleware".
+  * Uploade the frm file buy dropping it in the drop box
+  * Proceed to firmware upgrade
+  * Restart the player
+===== Steering =====
+  * The "**M**" button displays **the quick id**.
+  * The "**I**" key displays **quick info**.
+  * The "**D**" key displays the **quick debug**.
+  * To change the volume in the hardware tools, the device must be restarted.
+===== DMB400 Limitations: =====
   * PIP does not work in portrait mode
+===== DMB300 Limitations: =====
+  * Only one video supported
+  * PIP doesn't work