Differences

This shows you the differences between two versions of the page.

--- en:zebrixresellerinformation [2023/04/07 15:34]
nraulet [Informations sur l'intégrateur Zebrix]
+++ en:zebrixresellerinformation [2023/11/28 10:36] (current)
admin [zebrix client for Windows]
@@ Line 40: / Line 40: @@
   * **AutoSource Switching** should be enabled: this will insure the display to avoid being blocked on a wrong source following a user action with the remote control or screen panel buttons and always switch back to the zebrix app. The last step of the initial configuration guide explains how to enable it properly.
   * **Timer ON**: at least one "ON Timer" should be defined in the morning to avoid a screen to remain in standby mode following an unexpected "Power Off" triggered by the user from the remote control or screen panel buttons.
+  * **Screensaver OFF**: since a firmware update on SSSP10, a screensaver is now enabled by default and will be started automaticaly by the SAMSUNG DISPLAY, it must be disabled.
 You'll find a detailled guide regarding these options right there: [[en:samsung_recommended_settings|]]
@@ Line 58: / Line 59: @@
 This operation can easily be done, even by a non-technical person, using a fully unattended zebrix USB reinstallation drive.
 Here is guide explaining how to create and use such a USB drive: [[en:nucimageinstallation|]]
-You'll also need the download link to the latest version of the zebrix player OS: https://downloads.zebrix.net/20.11-03-ZEBRIX-USB-AUTOINSTALL.zip
+You'll also need the download link to the latest version of the zebrix player OS: https://downloads.zebrix.net/23.04-04-ZEBRIX-USB-AUTOINSTALL.zip
 ===== Information regarding other zebrix client =====
 ==== zebrix screensaver for Windows ====
-The zebrix screensaver for windows can be downloaded here: https://downloads.zebrix.net/zebrix-screen-electron.setup.1.0.10.exe
+The zebrix screensaver for windows can be downloaded here: https://downloads.zebrix.net/zebrix-screen-windows.setup.latest.exe
 ==== zebrix client for Windows ====
-We don't recommend using Windows for standalone digital signage. However, if you can't use a SOC based display or a zebrix external player, you can use the zebrix client for windows using the same setup package that is used for digital signage. At the last step of the installer when installing the screensaver is requested, please answer "no". You then need to set up windows to start the zebrix executable file at each startup and setup windows properly to avoid: reboots, pop-up, updates and so on.
+We don't recommend using Windows for standalone digital signage. However, if you can't use a SOC based display or a zebrix external player, you can use the zebrix client for windows using the same setup package that is used for the screensaver. At the last step of the installer when installing the screensaver is requested, please answer "no". You then need to set up windows to start the zebrix executable file at each startup and setup windows properly to avoid: reboots, pop-up, updates and so on.
 ==== zebrix client for Android display ====
   * https://screenv3.zebrix.net/zebrix-screen-latest-kiosk.apk kiosk version (will replace the android built-in launcher to become the default app that will run a(t foreground on device startup.