zebrix documentation : Configuring a SAMSUNG monitor with DHCP

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Configuring a SAMSUNG monitor with DHCP ======

===== Step 1 =====

Take the screen's remote control.

===== Step 2 =====

Switch on the screen and select the "PC" source. (SOURCE > PC on the remote control)

{{ public_media:remotecontrol_source.jpg?nolink&200 |}}

===== Step 3 =====

Once the PC source has been selected, press the "MENU" button.
{{ public_media:remotecontrol_menu.jpg?nolink&200 |}}

===== Step 4 =====

In the menu, use the directional arrows to select "Network" and then confirm.

{{ public_media:en:tizenmenu_network.jpg?nolink |}}

===== Step 5 =====

Move to "Network status" then "IP Settings" (this button only appears at the end of the connectivity test, or as soon as you have interrupted it using the "STOP" button).

{{ public_media:fr:tizenmenu_networkcheck.jpg?nolink |}}

{{ public_media:fr:tizenmenu_networkipsettingsbutton.jpg?nolink |}}




===== Step 6 =====

  * Select "Get automatically".
  * Confirm with "OK".

{{ public_media:fr:tizenmenu_networkdhcp.jpg?nolink |}}