zebrix documentation : Compatibility

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

{{:fr:lucky_goldstar_logo.png?nolink&400|}}

===== Compatibility =====
zebrix is compatible with LG displays that run:
  * webOS 4.0
  * webOS 4.1
  * webOS 6.0 

===== Screen already in use: factory reset recommended =====

  - Press the settings button on the remote control (cogwheel icon)
  - Go to **admin**
  - Enter pin code (default: 000000)
  - **Reset to factory**, the screen will go blank

===== New screen or first start-up after reset to factory settings =====

  - Select **Quickstart / Normal Configuration**.
  - Configuration of screen rotation language, input rotation activation, source: adapt if necessary (default settings can be kept as they are).
  - **<color #ed1c24> Date and time configuration required!</color>**
  - Done

<WRAP centre round important 60%>
**DATE / TIME:** **It is very important to correctly configure at least the correct date**, otherwise the first connection to zebrix in HTTPS will be impossible (certificate verification requires a correct date)
</WRAP>

===== Configuring zebrix on the screen =====

  - Start the screen with the **power** button on the remote control
  - Press the **parameters** button on the remote control (cogwheel icon)
  - In the **EZ Setting** category, go to SI Server Setting
  - Select **SI Server Setting**.
  - Set **Fully Qualified domain name** to **ON**.
  - Enter the URL: **https://screen.zebrix.net**
  - Application Launch mode: **Local**
  - Application Type: **ZIP**
  - **Local application Upgrade**: press **Remote** and confirm, this will launch the application download.
  - Exit using the cross at top right
  - Turn off the screen using the **power** button on the remote control
  - Turn the screen back on using the same button and wait.
  - A few seconds after restarting, a notification will be displayed confirming that the application has been downloaded/updated.
  - A few seconds later, the application starts automatically and the zebrix activation page appears.
  - After activation by the zebrix team, we recommend that you reboot the screen with the remote control one last time before using it.