zebrix documentation : Factory Reset for a Tizen/SSSP screen

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Factory Reset for a Tizen/SSSP screen ======
===== Step 1  =====

If the screen isn't already on, power it on. With the remote control, **select HDMI source**, **shut the screen off** by pressing the “POWER OFF” button and wait for 10 seconds.

{{ public_media:remotecontrol_poweroff.png?nolink&200 |}}

===== Step 2  =====

The folliwing part has to be done in less thank 5 seconds: 
Press the "**Mute**" button then press the following button in that order : "**1**", "**8**", "**2**" and then on the **power button** (which is red).

{{ public_media:remotecontrol_mute182power.jpg?nolink |}}

===== Step 3 =====

Once that code is entered correctly, the screen powers on and a menu appears.

{{ public_media:fr:servicemenu.jpg?nolink |}}

===== Step 4 =====

On that menu, Choose "Option" (it's already selected by default) then "Factory reset" and again, select "Factory reset".

{{ public_media:fr:servicemenuresetfactory.jpg?nolink |}}

===== Step 5 =====

If done correctly, the screen should power off 

 ===== Step 6 =====

You can now start the screen with the "Power On" button.

{{ public_media:remotecontrol_power.jpg?nolink&200 |}}

The screen is reset and ready to be configured.