zebrix documentation : Zebrix on Giada Players

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

================= Zebrix on Giada Players ===================

In order to use a Giada player with Zebrix, you need to equip it with :\\ 
-	4Gb of Ram \\ 
-	120 Gb SSD Drive \\ 

Then, you have to configure the BIOS of the units to allow Zebrix installation and proper run on the hardware which are : \\ 

Press the “del” key on device startup to enter the BIOS menu : \\ 

1 - Go to "Advanced"; then "wake configuration" then look for "JAHC Switch" -> enable \\ 
2 - Go to "Boot" -> Fastboot -> Disabled \\ 
3 - Still in the "Boot" menu -> Boot Option#1 = UEFI USB Device \\ 
4 - Still in the "Boot" menu -> Boot Option#2 = UEFI Nvme  \\ 
5 - Still in the "Boot" menu -> Boot Option#3 = UEFI Hard Disk\\ 
6 - In the "Security" menu -> attempt secure boot -> Disable  \\ 

Save and quit the BIOS menu (the device will restart) \\ 

When all of this is done, you can install the Zebrix image with a usb stick; here is the link to download it : \\ 

https://downloads.zebrix.net/18.11-01-ZEBRIX-120GB-K419-USB-AUTOINSTALL-US.zip

=============================