zebrix documentation : Samsung firmware updates by USB key

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Samsung firmware updates by USB key ======

<WRAP center round important 60%>
Make sure the display has the correct power supply and insert the USB stick.
</WRAP>

<WRAP center round important 60%>
Switch to an HDMI or DVI source using the "source" button on the remote control.
</WRAP>
 

  * Display the menu using the "menu" button on the remote control. 

{{:fr:pasted:20220422-144829.png}}

  * Scroll down to "assistance":

{{:fr:pasted:20220422-145018.png}}

  * Select "software update". 

{{:fr:pasted:20220422-145302.png}}

  * Select "update now" and confirm. 

{{:fr:pasted:20220422-145442.png}}

  * The screen will search for updates on the key.


{{:fr:pasted:20220422-150117.png}}

<WRAP center round important 60%>
After a few seconds, a message will ask you to confirm the update. 
This message does not stay on the screen for long, so pay attention.
</WRAP>
 
  * Confirm with "yes" using the button in the centre of the arrows.

<WRAP center round important 60%>
The screen does this update, the operation may take several minutes.
</WRAP>

After confirmation that the update was successful, your screen will restart. 

<color #ed1c24>__If the screen does not restart automatically, you can restart it manually using the buttons 
Power Off and Power On.__</color>

After restarting, the updated screen will reconnect to our solution and resume content delivery 
in a more stable manner.

<WRAP center round info 60%>
If you have any problems with this update, our support team is at your disposal 
03.20.41.59.69 or support.ds@manganelli.com
</WRAP>