zebrix documentation : Factory Reset Procedure on SSSP Screen

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Factory Reset Procedure on SSSP Screen ======

===== Step 1 =====

If the screen is not powered on, turn it on. Take the remote control, choose the HDMI Source, and confirm with the “OK” button on the remote.

{{:fr:image_9.jpg?600|}} {{:fr:image_4.png?200|}}

===== Step 2 =====

First, press the “Power Off” button on the remote.

Then press the following key combination: “Mute” followed by the numeric keys: “1”, “8”, and “2”, then press the power button (red).

{{:fr:image_7.jpg?200|}}{{:fr:image_8.jpg?200|}}

===== Step 3 =====

Once the key combination is entered, a menu will appear: select “Option”.

{{:fr:image_1.png?600|}}

===== Step 4 =====

Then select “Factory reset”.

{{:fr:image_2.png?600|}}

And again, select “Factory reset”.

{{:fr:image_3.png?600|}}

The screen should turn off after completing this operation.

Turn the screen back on using the “Power On” button.

{{:fr:image_11.png?200|}}

If the procedure was completed correctly, the setup assistant will appear.