zebrix documentation : ** SSSP SCREEN INITIAL SETUP **

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== ** SSSP SCREEN INITIAL SETUP ** ======

This guide will allow you to perform the initial setup of an SSSP Screen, you can perform those steps after a factory reset.


{{:en:langue.jpg?400}}
Step 1 : Choose your language 



Step 2 : Choose your screen orientation
----
{{:en:powersettings.jpg?400}}
Step 3 : Disable the Auto Power Off 
----
{{:en:network_test.jpg?400}}
Step 4 : Choose the network adapter, if a RJ45 Network wire is connected, the screen will perform a network diagnostic. **The Screen need to be connected to Internet to reach Zebrix.**
----
{{:en:play_mode.jpg?400|}}
Step 6 (step 5 is skipped if you are connected to the internet) : define this option to 'URL Launcher' 
----

you will need to use this URL : http://screenv2.zebrix.net , then press "Done"

----
{{:en:complete.jpg?400}} {{:en:home.jpg?400}}
Step 7 : Your screen is correctly configured. Pressing "OK" will send you to the "Home" Menu, from wich you can start Zebrix. Press OK
----
Your screen should now appear on Zebrix, you can now manage it via the CMS.