===== Initial configuration SSSP6 screen ======

The following operations must be carried out using the Samsung remote control


__1 - Language selection __ 

- Scroll down using the arrows and select your language using the OK button (located between the arrows). - Right arrow to move on to the next menu.
- Right arrow to go to the next menu 

{{ :fr:1_-_choix_langue.jpg?800 |}}

__2 - Type of installation __ 

- Select "basic configuration" and confirm 
- Right arrow to go to the next menu 

{{ :fr:2_-_type_d_installation.jpg?800 |}}

__3 - Display orientation __

Depending on how your equipment is installed 

- Select portrait or landscape and confirm 

- Right arrow to go to the next menu 

{{ :fr:3_-_orientation_de_l_affichage.jpg?800 |}}

__ 4 - Connecting to an internet network__} 

The equipment can be connected either to a wireless network (Wifi) or to a wired network (RJ45), depending on your type of connection. 

- If the screen is connected to the wired network, it will perform a network status check. If everything is OK, you will need to do the following with the right arrow. 

{{ :fr:4-2_-_connexion_cablee.jpg?800 |}}

- If the screen is connected via Wi-Fi, you will need to select your Wi-Fi network, then enter your password before finishing. (The screen must be connected to a secure Wifi network).
If everything is OK, click on the right arrow to continue.

{{ :fr:4-1_-_connexion_sans_fil.jpg?800 |}}

**- If you encounter any connection problems, please contact Manganelli support at 03.20.41.59.69**.

__ 5 - Reading via __ 

Once the network has been set up, you need to install the application. In Read via, select Launch URL. Then click Next (right arrow) 

{{ :fr:5_-_lire_via.jpg?800 |}}

Enter the URL of the zebrix server:

For the USA http://screen.zebrix.us

for Europe http://screen.zebrix.net

Then click on "Done".

{{ :fr:6_-_renseigner_l_url.jpg?800 |}}

__ 6 - Configuring the RM server__

In the server address, enter: rm.manganelli.com:7001 then click "Done" and right arrow to go to the next menu. 

{{ :fr:7_-_rm_serveur.jpg?800 |}}

__ 7 - Server peripherals __ 

You don't have to do anything, just right arrow to skip the menu. 

{{ :fr:8_-_peripherique_sur_serveur.jpg?800 |}}

__ 8 - Setting the date and time __ 

Use the arrows to set the screen to the correct date and time, 
Caution: if the screen is not set correctly for the time and day, this could cause problems with broadcasting on the screens. 

{{ :fr:9_-_reglage_horloge.jpg?800 |}}

Congratulations, the screen configuration is now complete!

{{ :fr:10_-_ecran_config.jpg?800 |}}

All that's left is to launch the application by pressing "Home". 

{{ :fr:11_-_home_lancement_url.jpg?800 |}}

Select "Launch URL"

{{ :fr:12_-_installation_of_the_application.jpg?800 |}}

{{ :fr:13_-_installation_termine.jpg?800 |}}

Once the application is complete, the content will be broadcast. 

(If this is an installation configuration, the screen may need to be activated. Please contact support if this is the case.) 


{{ :fr:14_-_finitopipo.jpg?800 |}}