===== Initial Setup – Tizen 7 Screen ======

Follow the steps below using the Samsung remote control.

__1 - Language Selection__

Use the arrow keys to scroll and select "French" with the OK button (between the arrows).

Press the right arrow to proceed to the next menu.

{{ :fr:inittizen72.png?1000 |}}

__2 - Connect to a Network__

You can connect the device via a wireless network (Wi-Fi) or a wired connection (RJ45) depending on your setup. Select the option with the OK button.

{{ :fr:connexioncablee.png?1000 |}}


Wired: The screen will check the network status. If everything is OK, press the right arrow to continue.
{{ :fr:connexioncableelok.png?1000 |}}

Wi-Fi: Select your network and enter the password, then press Finish. (A secure Wi-Fi connection is required.)
The screen will verify the connection; if everything is OK, press the right arrow to continue.

{{ :fr:inittizen71.png?1000 |}}
{{ :fr:inittizen73.png?1000 |}}
{{ :fr:connectionsansfilok.png?1000 |}}

- For connection issues, contact Manganelli support at 03.20.41.59.69

__3 - Smart Signage Privacy Notice__

Press OK, then the right arrow to continue.

{{ :fr:inittizen76.png?1000 |}}

__4 - Installation Type__

Select "Manual Setup" with the OK button.

{{ :fr:inittizen77.png?1000 |}}

__5 - Display Orientation__

Choose portrait or landscape according to your setup and confirm.

Press the right arrow to proceed.

{{ :fr:orientationaffichage.png?1000 |}}

__6 - Player Selection__

Select "Custom Application" with the OK button.

{{ :fr:inittizen74.png?1000 |}}

Enter the Zebrix server URL:

USA: http://screen.zebrix.us

Europe: http://screen.zebrix.net

Click "Finish."

{{ :fr:intitizengestionappli.png?1000 |}}

__7 - Configure the RM Server__

Enter the server address: rm.manganelli.com:7001

Press "Finish" and then the right arrow to continue.

{{ :fr:connectionrmserveur.png?1000 |}}

__8 - Server Device__

No action needed, just press the right arrow.

{{ :fr:peripheriquesurserveur.png?1000 |}}

__9 - Power Off Settings__

Select "Off" and press the right arrow to continue.

{{ :fr:hors_ten._auto.png?1000 |}}

__10 - Date and Time Settings__

Use the arrows to set the correct date and time.
⚠️ Incorrect settings may cause display issues.

Press the right arrow to continue.

{{ :fr:definitionheure.png?1000 |}}

__11 - Pin Code__

No action needed, just press the right arrow.

{{ :fr:defpin.png?1000 |}}

__12 - Auto Source Change__

Press MENU, navigate to System > Auto Source Change.

{{ :fr:system.png?1000 |}}

Select Auto Source Change > New Input.

Use the arrows to select Default Input > Custom Application.

{{ :fr:changementsourceauto.png?1000 |}}

__13 - Set Up Wake-Up Timer__

Press HOME, then navigate to Settings > Prog. On/Off using the right arrow.

{{ :fr:inittizenprogtime.png?1000 |}}

Select Prog. On.

{{ :fr:progact_desact.png?1000 |}}

For Prog. On 1 and Prog. On 2, change from "Do not use" to select the days and set wake-up times according to the business hours.

{{ :fr:progr.activ.png?1000 |}}
{{ :fr:progr.activ._1.png?1000 |}}

__14 - Power Settings__

Press MENU, navigate to System > Power Settings.

{{ :fr:reglagealimentation.png?1000 |}}

Enable the settings as shown in the image.

{{ :fr:reglagealimentation_configurationdistance.png?1000 |}}

🎉 Configuration is complete!

{{ :fr:readystart.png?1000 |}}

Launch the app by pressing "Home."

Go to the "Functions" tab and select "Custom APP."

{{ :fr:launchcustumapp.png?1000 |}}
{{ :fr:installationok.png?1000 |}}

Once the app is launched, the content will be displayed.

If this setup is during an installation, the screen may request activation. Contact support if this occurs.

{{ :fr:videoplaying.png?1000 |}}