====== NUC Firmware Updates via USB Drive ======

<WRAP center round important 60%>

Before starting, we recommend that you note down all the network information of your player, as this will be completely erased.
</WRAP>

==== Step 1: Update the NUC ====

Plug your USB drive into the player and turn it on.

Normally, the player should boot automatically from the USB drive, but if it doesn’t:

Case #1: You will need to access the BIOS of your player

You can access it by pressing F10 during the player startup.
Once in the BIOS, you can select a boot order so that your player boots from the USB drive:

<WRAP center round info 60%>
UEFI : USB : KingstonDataTraveler 3.0 : PART 0 : OS Boot loader
</WRAP>

{{:fr:pasted:20220428-152243.png}}

Case #2: A hardware issue prevents the player from booting correctly

In this case, please contact our support team at +33 (0)3 20 41 59 69 or by email at support@zebrix.net
.

==== Step 2: Choose the Firmware ====

Once the selection is confirmed, the firmware installation will start and all steps will execute automatically.

{{:fr:pasted:20220428-152505.png}}

When the installation is complete, the message below will appear. Remove the USB drive and then restart the player.

{{:fr:pasted:20220429-131228.png}}