Zebrix on Innes Players DMB300 & DMB400

• Connect the player to the network using an ethernet cable
• Connect the player to a screen
• The screen should display a test card containing network information

• Connect using an Internet browser with the address ipV4 or ipV6 to access the WebUI (e.g. http://10.10.10.10/.admin)
• Enter the login and password: (admin / admin)

• Go to “Configuration” then “App”
• Select “Third Party” then “Pull Webdav”
• Enter the URL : http://screen.zebrix.net“ and enter 23:59:59 for the “heartbeat”
• Click on “Validate”,
• Do not restart the player immediately

• Go to the “Maintenance” tab, then to “Test card”.
• Deactivate test card
• Then restart the device using the button at top right
  

• Download the configuration script:
• Format the USB key in FAT32
• Inject the script into the USB key, then into the player


The player restarts, and the Zebrix solution is launched.



• Download zip file

or

• Unzip it, you'll get a frm file.
• Enter the WebUi address on browser (corresponding to the player's ip)

• Go to “Maintenance” then “Middleware”.
• Uploade the frm file buy dropping it in the drop box
• Proceed to firmware upgrade
• Restart the player

• The “M” button displays the quick id.
• The “I” key displays quick info.
• The “D” key displays the quick debug.
• To change the volume in the hardware tools, the device must be restarted.

• PIP does not work in portrait mode

• Only one video supported
• PIP doesn't work