Differences

This shows you the differences between two versions of the page.

--- en:configuration_videowall_samsung [2024/02/13 10:40]
nraulet created
+++ en:configuration_videowall_samsung [2024/02/13 10:41] (current)
nraulet
@@ Line 27: / Line 27: @@
   * choose "Natural" mode: the image gives the impression that it is passing "behind" the spaces between the screens. This mode is less disturbing for the viewer, but the image is cropped to achieve this effect.
+====== Step 5 ======
+In order to physically set up the screen wall, you need to define the position of each screen on the wall, so as to connect them in series (block of 4 screens).
+**On older generation screens, we use Display Port in/Out:**.
+Choose your first screen.
+At the rear of the screen, connect a DisplayPort cable to the **"Display __OUT__"** output.
+This same cable should then be connected to screen number 2, on the **"Display __IN__"** output.
+This operation must be repeated from screen 2 to screen 2 (on the opposite side), and from screen 2 (on the opposite side) to screen 1 (on the opposite side).
+{{:en:ancienne_configuration.png?direct&600|}}
+**On new-generation screens, we only chain HDMI 2.0 :**
+Choose your first screen.
+At the rear of the screen, connect a DisplayPort cable to the **"HDMI __OUT__"** output.
+This same cable should then be connected to screen number 2, on the **"HDMI __IN__"** output.
+This operation must be repeated from screen 2 to screen 2 (on the opposite side), and from screen 2 (on the opposite side) to screen 1 (on the opposite side).
+{{:en:nouvelle_configuration_bonne_.png?direct&600|}}