**This is an old revision of the document!**

-Activate touch mode-

Open the Zebrix control panel by pressing “F1”.

go to the “Touch” tab and tick the “Touch Screen mode” box

Touch mode is now activated.

Checking the touch configuration:**__

Open the terminal by pressing windows+T

write: export DISPLAY=:0.0

Press enter, then: xinput –list

A list of all pointer devices should appear, select the corresponding one and copy its full name.

Open the zebrix.conf file with the command: nano /opt/zebrix/zebrix.conf

and paste the name of the device on the “TOUCHPANEL” line:

the Touchmode line must be set to “TRUE”.

Then press Ctrl+X to close the console. When the window asks you for confirmation, press Y to save (do not change the file name).