Screen already in use: factory reset recommended

  • Press the settings button on the remote control (cogwheel icon)
  • Go to admin
  • Enter pin code (default: 000000)
  • Reset to factory, the screen will go blank

New screen or first start-up after reset to factory settings

  • Select Quickstart / Normal Configuration.
  • Configuration of screen rotation language, input rotation activation, source: adapt if necessary (default settings can be kept as they are).
  • Date and time configuration required!
  • Done

DATE / TIME: It is very important to correctly configure at least the correct date, otherwise the first connection to zebrix in HTTPS will be impossible (certificate verification requires a correct date)

Configuring zebrix on the screen

  • Start the screen with the power button on the remote control
  • Press the parameters button on the remote control (cogwheel icon)
  • In the EZ Setting category, go to SI Server Setting
  • Select SI Server Setting.
  • Set Fully Qualified domain name to ON.
  • Enter the URL: https://screen.zebrix.net
  • Application Launch mode: Local
  • Application Type: ZIP
  • Local application Upgrade: press Remote and confirm, this will launch the application download.
  • Exit using the cross at top right
  • Turn off the screen using the power button on the remote control
  • Turn the screen back on using the same button and wait.
  • A few seconds after restarting, a notification will be displayed confirming that the application has been downloaded/updated.
  • A few seconds later, the application starts automatically and the zebrix activation page appears.
  • After activation by the zebrix team, we recommend that you reboot the screen with the remote control one last time before using it.