Here is the translation of your deployment guide into English, strictly preserving all your syntax, markup, image paths, and tags (such as =====, ====, ===, ``, //, and {{ }}):

How to deploy a Philips Android 10 screen under zebrix

Prerequisites:

  • Connect the screen to a power outlet.

Network: Cable connection

  • Connect the screen to the network via the RJ45 port.

Booting the screen

After pressing the On button on the remote control, the screen boots up.

Welcome

Select the language from the drop-down menu on the left side of the screen, then click Start.

Clone media files internally

No files need to be cloned at this stage. Select an option (for example, “from a USB memory device”), then choose Skip this step.

Signage display settings

Select Manual settings, then click Next using the remote control.

Screen name

Assign a name to the screen. Otherwise, the default name corresponds to its MAC address. This name can be modified later in Zebrix.

Remote control

Lock the remote control to prevent accidental tampering, then click Next.

Security settings

Check the following options:

  • SICP network port
  • ADB over network
  • Administrator password
  • SD card / USB external storage
  • Unknown sources

Then click Next.

Network settings

Verify that the Ethernet option is selected, then click Next.

Enable the network: the connection will be established automatically.

Setup successful

Click Finish.

Wave

Select Skip. This feature is not required for Zebrix.

Install Zebrix

1. Download the application

Point the remote control at the screen's infrared sensor, then press successively: Home - 1 - 8 - 8 - 8

Access the menu, then click on Apps.

Open Chromium to access the web browser.

Enter the following URL: https://apk.zebrix.net The download will start automatically.

2. Install the application

Select Storage.

Open the Download folder, then select the zebrix-screen-latest.apk file.

Launch the application installation.

Configure Android

Open Settings to access the Android menu.

Signage display

Configure Zebrix as the default application:

Access Signage display, then follow this path:

  • Source settings
  • Android source
  • Custom app
  • Check Force restart custom app
  • Choose app
  • Select Zebrix Screen
  • Click Save

Then return to the Signage display menu, and:

  • Open Misc.
  • Enable TeamViewer support

Apps

Authorize the zebrix application to save data to the screen's internal storage.

Access Apps, then follow this path:

  • Select the zebrix screen application
  • Click on Permissions (Storage)
  • Then go to Permission manager
  • Allow storage access by toggling the button next to storage.

Display

Verify font size:

From the Android home screen:

  • Open Display
  • Verify that the size is set to Default

If not:

  • Open Font size
  • Select Default

System

From the Android home screen:

  • Open System
  • Access Developer options
  • Enable the option
  • Open WebView implementation
  • Select Android System WebView 74.0.3729.186

Screen internal configuration

Press the Menu button on the remote control.

In Configuration1:

  • Open Boot on source
  • Choose Custom in Input

In Configuration2:

  • Open Logo
  • Select Off

In Advanced options, configure the following items:

Date and time

  • Open Date & time
  • Enable Auto sync
  • Choose the time zone London / Dublin GMT +1:00

Auto signal detection

  • Open Auto signal detection
  • Select Failover mode
  • In Failover1, choose Custom
  • Click Save

Power saving

  • Select Mode 4

Restart the screen to access the Zebrix activation screen.

Configuration complete.