Zebrix on Giada Players

In order to use a Giada player with Zebrix, you need to equip it with :
- 4Gb of Ram
- 120 Gb SSD Drive

Then, you have to configure the BIOS of the units to allow Zebrix installation and proper run on the hardware which are :

Press the “del” key on device startup to enter the BIOS menu :

1 - Go to “Advanced”; then “wake configuration” then look for “JAHC Switch” → enable
2 - Go to “Boot” → Fastboot → Disabled
3 - Still in the “Boot” menu → Boot Option#1 = UEFI USB Device
4 - Still in the “Boot” menu → Boot Option#2 = UEFI Nvme
5 - Still in the “Boot” menu → Boot Option#3 = UEFI Hard Disk
6 - In the “Security” menu → attempt secure boot → Disable

Save and quit the BIOS menu (the device will restart)

When all of this is done, you can install the Zebrix image with a usb stick; here is the link to download it :

https://downloads.zebrix.net/18.11-01-ZEBRIX-120GB-K419-USB-AUTOINSTALL-US.zip