NUC Firmware Updates via USB Drive

Before starting, we recommend that you note down all the network information of your player, as this will be completely erased.

Step 1: Update the NUC

Plug your USB drive into the player and turn it on.

Normally, the player should boot automatically from the USB drive, but if it doesn’t:

Case #1: You will need to access the BIOS of your player

You can access it by pressing F10 during the player startup. Once in the BIOS, you can select a boot order so that your player boots from the USB drive:

UEFI : USB : KingstonDataTraveler 3.0 : PART 0 : OS Boot loader

Case #2: A hardware issue prevents the player from booting correctly

In this case, please contact our support team at +33 (0)3 20 41 59 69 or by email at support@zebrix.net .

Step 2: Choose the Firmware

Once the selection is confirmed, the firmware installation will start and all steps will execute automatically.

When the installation is complete, the message below will appear. Remove the USB drive and then restart the player.