**This is an old revision of the document!**

Zebrix on Innes Players

How do I install zebrix on an innes player?

  • Connect the player to the network using an ethernet cable
    • Connect the player to a screen
    • The screen should display a test pattern containing network information

Installation via the WebUI:

  • Connect using an Internet browser with the address ipV4 or ipV6 to access the WebUI (e.g. http://10.10.10.10/.admin)
  • Enter the login and password: (admin / admin)
  • Go to “Configuration” then “App”
  • Select “Third Party” then “Pull Webdav”
  • Enter the URL : http://screen.zebrix.net“ and enter 23:59:59 for the “heartbeat”
  • Click on “Validate”,
  • Do not restart the player immediately
  • Go to the “Maintenance” tab, then to “Test card”.
  • Deactivate test card
  • Then restart the device using the button at top right

Installation via USB key:

  • Download the configuration script:
  • Format the USB key in FAT32
  • Inject the script into the USB key, then into the player

Warning: The screen must display the test card before you can inject the configuration script.


The player restarts, and the Zebrix solution is launched.



Player version update :

  • Enter the WebUi address on browser (corresponding to the player's ip)
  • Go to “Maintenance” then “Middleware”.
  • Download zip file
  • Unzip it, then take the file and put it in the drop box
  • Restart the player

Limitations:


  • PIP only works on the DMB400 model
  • PIP does not work in portrait mode